Feeds:
Posts
Comments

Archive for September, 2008

KCDA Drift Event II

Last thursday KCDA held it’s second Drifting event at Heartland Park’s skidpad. This time the course was set up a bit differently. A few more corners, a couple walls, and one seriously long straightaway added a whole new element to the equation. This course gave the drivers a bit more room to apply their own [...]

Read Full Post »

While normally I don’t post what someone else has written I found this article amusing. The bantering in the Nissan vs. Porsche world has been as bad as any Vett Vs Porsche argument I have ever seen.

Porsche has just run its own back-to-back tests with the Japanese company’s GT-R supercar and says it could [...]

Read Full Post »

We have a very good customer that has sent various cars to us in the past. One of his priors was a very nice 91 965 that after 3 weeks of mods the car was truly to die for. As all things come to pass so did this car. No sooner than it sold I [...]

Read Full Post »

Last saturday night we had a little get together out in Olathe. Basically a bunch of us from the Kansas City Drift Association thought it was time to get together, check out some cars, and give everybody a chance to meet each other. We had a pretty good turn out with plenty of cool drift [...]

Read Full Post »

Imagine you have built a very strong 996TT motor. All the things you have done in the past, knowing they work well. What happens if you make more power than you are suppose to? Imagine making 700+ AWHP on the dyno with the HP scale going up and up and all the sudden….well lets just [...]

Read Full Post »

A little wiring help

I know that some of you have the courage to tackle some minor wiring repairs , or even have installed new stereo’s or a new set of gauges. what ever you are doing wiring can seem complicated but in is a basic once you understand it and know how to diagnose or modify your wiring.  Electricity can [...]

Read Full Post »

Porsche Posters

I have a cool project at the shop that I am working on, but unfortunately did not have a camera handy today, and what good is a blog without pictures, so here is something instead that made me laugh.  I’ll find a few more to poke some fun

Read Full Post »

Like anyone I was up bright and early to place the lower end of our monster 996TT motor together. Part of that process is placing the rods on the crankshaft. In most cases of factory rods engine-builders have been tightening rod bolts with a torque wrench and getting away with it. But in today’s high-performance [...]

Read Full Post »

Friday the 29th of august was a begining of a great weekend so I started off the day by welding up the exhaust for the shop truck that we have. Its a 1991 toyota truck that litteraly ran head on into a tree. Its in good condition…except for the exhaust, so here are a couple [...]

Read Full Post »

Grease-orama

Last weekend the rat rods were out in full swing down at the Merriam drive-in. Plenty of completely custom rides showed. From choppers to Beetles and everything in between.

Read Full Post »

Older Posts »